Kia Sportage: Blower

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower

Mode Control Actuator: Repair procedures

Inspection 1. Ignition "OFF� 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the term ...

Blower Unit: Components and Components Location

Component Location Components 1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove ...

Other Information:

Under Body: Body Repair
Projected Dimensions Front side member tooling hole (O6.5)Side cover mounting hole (O8)Front sub frame mounting hole (O17)Front sub frame mounting hole (O18)Front side member rear extension tooli ...

Cowl Top Cover: Repair procedures
Replacement 1. Remove the wiper arm cover (B). 2. After loosening the mounting nuts, then remove the wiper arm (A). Tightening torque : 22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft ...