Kia Sportage: Climate Control Air Filter: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Climate Control Air Filter: Description and Operation

Blower Resistor: Repair procedures

Inspection 1. Measure terminal-to-terminal resistance of the blower resistor. 2. measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...

Climate Control Air Filter: Repair procedures

Replacement 1. Disconnect the damper (B) and glove box lift (C) from the glove box (A). 2. Remove the filter cover with pushing the knob. 3. Replace the air filter (B), install it after ma ...

Other Information:

Starter: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque : 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Remove the ...

Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher than the bottom of the wheel hub. Drive through any water slowly. Allow adequate stopping distance because brake perf ...