Kia Sportage: Rear Suspension System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Rear Suspension System

Front Cross Member: Repair procedures

Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bo ...

Components and Components Location

Components Location 1. Sub frame2. Assist arm3. Upper arm4. Lower arm5. Trailing arm6. Rear axle7. Coil spring8. Shock absorber9. Drive shaft10. Stabilizer11. Differential carrier Components ...

Other Information:

Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be use ...

Balance Shaft & Oil Pump: Repair procedures
Removal BSM (Balance Shaft Module) Chain System 1. Remove the timing chain. (Refer to Timing System in this group) 2. Install a stopper pin (A) after compressing the balance shaft chain tens ...