Replacement |
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the nuts & bolts and then remove the trailing arm (A) from the rear axle.
[2WD] [4WD] |
3. |
Loosen the parking brake cable bracket bolt (A) & height sensor bracket bolt (B).
[2WD] [4WD] |
4. |
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
|
5. |
Installation is the reverse of removal. |
Resetting the sunroof
Whenever the vehicle battery is disconnected or discharged, you must reset your
sunroof system as follows:
1.Turn the ignition switch to the ON position.
2.Open the roller blind.
3.Close the sunr ...
4WD ECU: Schematic Diagrams
Circuit Diagram
4WD ECU Connector
PinFunction1Oil pressure motor A2Oil pressure motor B3Lock mode switch4-5Input sensor signal(+)6-7CAN communication line (High)8CAN communication line (Low)9- ...