Kia Sportage: Front Strut Assembly: Components and Components Location - Front Suspension System - Suspension System - Kia Sportage SL Service & Repair ManualKia Sportage: Front Strut Assembly: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Front Suspension System / Front Strut Assembly: Components and Components Location

Components

1. Strut assembly
2. Insulator
3. Bearing
4. Spring upper pad
5. Spring
6. Dust cover
7. Spring lower pad

Components and Components Location
Components Location 1. Front axle2. Front lower arm3. Drive shaft4. Stabilizer bar5. Steering gearbox6. Sub frame7. Front strut assembly ...

Front Strut Assembly: Repair procedures
Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub ...

Other Information:

Intake Actuator: Description and Operation
Description 1. The intake actuator is located at the blower unit. 2. It regulates the intake door by signal from control unit. 3. Pressing the intake selection switch will shift between re ...

Panoramaroof Switch: Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp assembly. (Refer to the BD group - "Roof trim") 3. Check for continuity between the termina ...

Categories

Copyright www.kispmanual.com 2014-2026