Kia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS): Specifications

Specifications
Direct control VFS[26/B]
? Control type : Normal low type
Control Pressure kpa (kgf/cm?, psi)
9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)
Current value(mA)
50 ~ 850
 Internal resistance(?)
5.1

26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation
Description 26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake. ...

26 Brake Control Solenoid Valve(26/B_VFS): Schematic Diagrams
Circuit Diagram ...

Other Information:

Troubleshooting
Troubleshooting Customer Complaint Analysis Check Sheet There are six areas where a problem can occur: wiring harness, the radio, the CD player, and speaker. Troubleshooting enables you to con ...

Water pump: Repair procedures
Removal and Installation 1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to drain with speed. 2. Remove the drive belt (A) after turning the drive belt ten ...

Categories


Copyright © www.kispmanual.com 2014-2024