Kia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS): Description and Operation

Description
26Brake control solenoid valve(26/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake.

Torque Converter Control Solenoid Valve (T/CON_VFS): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

26 Brake Control Solenoid Valve(26/B_VFS): Specifications
Specifications Direct control VFS[26/B] ? Control type : Normal low type Control Pressure kpa (kgf/cm?, psi)9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54)Current value(mA)50 ~ 850 Internal resist ...

Other Information:

Turbo Charger: Repair procedures
On-vehicle Inspection Turbocharger Diagnostic Flow If any problem related with turbocharger, such as lack of engine power, poor acceleration, abnormal engine noise or oil leaks, may occur, c ...

Fuel Tank Pressure Sensor (FTPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition swit ...

Categories


Copyright © www.kispmanual.com 2014-2024