Components Location |
1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band | 8. Fuel tank pressure sensor (FTPS) 9. Canister close valve (CCV) 10. Fuel level sensor (FLS) 11. Fuel filler hose 12. Ventilation hose 13. Vapor tube 14. Fuel pump locking ring |
[High Pressure Fuel Line] |
1. High Pressure Fuel Pump 2. High Pressure Fuel Pipe | 3. Delivery Pipe 4. Injector |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops. |
Rear Washer Motor: Repair procedures
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
Before filling the reservoir tank with water, check the
fil ...
Manual climate control system
1.Turn the ignition switch to the ON position.
2.Turn the mode selection knob to the defrost position ().
3.Press the air intake control button at least 5 times within 3 seconds.
The indicator li ...