The steering effort becomes heavier.
Electric Waste Gate Actuator (EWGA): Repair procedures
Inspection
[Motor]
1.
Turn ignition switch OFF.
2.
Disconnect the EWGA connector.
3.
Check that the EWGA is stuck by foreign material.
4.
Measure resistance between motor (+) and ( ...
ICM (Integrated Circuit Module) Relay Box: Repair procedures
Inspection
Rear Wiper Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connect ...