Specifications |
Temp.[(°C)°F] | Resistance (k?) |
(-40)-40 | 48.1 |
(-20)-4.0 | 15.6 |
(0)32.0 | 5.88 |
(20)68.0 | 2.51 |
(40)104.0 | 1.11 |
(60)140.0 | 0.61 |
(80)176.0 | 0.32 |
(100)212.0 | 0.18 |
(120)248.0 | 0.10 |
(140)284.0 | 0.06 |
(150)302 | 0.05 |
Engine Control Module (ECM): Schematic Diagrams
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [CHTG-AG]
PinNo.DescriptionConnected to1Ignition Coil (Cylinder #2) control output [Without Smart Key]Ignition Coil (Cylin ...
Blower Resistor: Repair procedures
Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...