Kia Sportage: Rear Shock Absorber: Components and Components Location - Rear Suspension System - Suspension System - Kia Sportage SL Service & Repair ManualKia Sportage: Rear Shock Absorber: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Suspension System / Rear Suspension System / Rear Shock Absorber: Components and Components Location

Components

1. Self locking nut
2. Bracket assembly
3. Bumper rubber
4. Dust cover
5. Shock absorber

Components and Components Location
Components Location 1. Sub frame2. Assist arm3. Upper arm4. Lower arm5. Trailing arm6. Rear axle7. Coil spring8. Shock absorber9. Drive shaft10. Stabilizer11. Differential carrier Components ...

Rear Shock Absorber: Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bol ...

Other Information:

License Lamps: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the lens (A) and license lamp (B) after loosening 2 screws. Installation 1. Install the bulb. 2. Install the license ...

Photo Sensor: Repair procedures
Inspection 1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. 4. The voltage will rise with higher ...

Categories


Copyright © www.kispmanual.com 2014-2025