Kia Sportage: Inhibitor Switch: Description and Operation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Inhibitor Switch: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch: Description and Operation

Description
Inhibitor Switch monitors the lever''s position(P, R, N, D) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF): Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). 3. Remove the air cleaner assembly. (1) Disconnect the breather hose (A) and brake booster intensifier hose. (2) ...

Inhibitor Switch: Specifications
Specifications ? Type: Combination of output signals from 4 terminals Power supply (V)12Output typeCombination of output signals Signal Code Table ?PP-RRR-NNN-DDS112V12V00000S2012V12V12V00 ...

Other Information:

Brake Pedal: Repair procedures
Removal 1. Remove the crash pad lower panel and reinforcement panel. (Refer to the Body group- crash pad). 2. Pull down steering column shaft after removing bolts and nuts. 3. Disconnect t ...

Rear Differential Carrier: Repair procedures
Replacement 1. Drain the differential gear oil.     Filler plug (A) & Drain plug (B) tightening torque. Tightening torque Filler plug (A): 39.2 ~ 58.8 N.m (4.0 ~ ...

Categories


Copyright © www.kispmanual.com 2014-2024