Specifications
ON/OFF Solenoid Valve(SS-A)
? Control type : Normal low type
Control pressure kpa (kgf/cm?, psi)490.33(5.0, 71.12) Internal resistance(?)10 ~ 11
...
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct (A).
3.
Remove the air cleaner assembly.
(1)
Disconnect the breather hose (A) and brake booster intensifier hose.
(2)
...
Other Information:
Blower Resistor: Repair procedures
Inspection
1.
Measure terminal-to-terminal resistance of the blower resistor.
2.
measured resistance is not within specification, the blower resistor must be replaced. (After removing the resi ...