Components |
1 . Housing 2 . Cover 3. Sealing Cover 4 . Motor 5. Pinion 6 . Shaft Gear | 7 . PCB Assembly 8 . Middle Gear 9 . Lever 10 . Lever Pin 11 . Rod - End 12 . Rod |
Starter: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque :
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase. This system supplies fresh
filtered air to the crankcase th ...