Kia Sportage: Intake Air Temperature Sensor (IATS): Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS): Description and Operation
| Description |
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM uses not only MAPS signal but also IATS signal.
This sensor has a Negative Temperature Coefficient (NTC) Thermister and
it''s resistance changes in reverse proportion to the temperature.
Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Tur ...
Intake Air Temperature Sensor (IATS): Specifications
Specification
TemperatureResistance (k?)°C°F-40-4040.93 ~ 48.35-20-413.89 ~ 16.030325.38 ~ 6.0910503.48 ~ 3.9020682.31 ~ 2.57401041.08 ~ 1.21501221.56 ~ 1.74601400.54 ~ 0.62801760.29 ~ 0.34
...
Other Information:
Radiator: Repair procedures
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg ...
Components and Components Location
Component (1)
1. Steering column shaft2. Lighting switch3. Wiper and washer switch4. Screw5. Clock spring
Component (2)
...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024