Kia Sportage: Cylinder Head: Components and Components Location - Cylinder Head Assembly - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Cylinder Head: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head: Components and Components Location

Components

1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper bearing
8. Exhaust camshaft lower bearing
9. MLA
10. Retainer lock
11. Retainer
12. Valve spring
13. Valve stem seal
14. Valve
15. Cylinder head
16. Cylinder head gasket
17. Fuel pump bracket

Camshaft: Repair procedures
Removal Timing chain cover removal is not required for this procedure.     • Use fender covers to avoid damaging painted surfaces. • To avoid damagin ...

Cylinder Head: Repair procedures
Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damaging the cylinder head, wait until the engine coolant temperature ...

Other Information:

Canister Close Valve (CCV): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

Side impact air bag
Your vehicle is equipped with a side impact air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and/or the front passenger with additional protection t ...

Categories

Copyright www.kispmanual.com 2014-2026