Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gauge to check tire pressure. You can not tell if your tires are properly inflated simply by looking at them. Radial tires may look properly inflated even when they're underinflated.
Check the tire's inflation pressure when the tires are cold. - "Cold" means your vehicle has been sitting for at least three hours or driven no more than 1.6 km (1 mile).
Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement. If the cold tire inflation pressure matches the recommended pressure on the tire and loading information label, no further adjustment is necessary. If the pressure is low, add air until you reach the recommended amount.
If you overfill the tire, release air by pushing on the metal stem in the center of the tire valve. Recheck the tire pressure with the tire gauge. Be sure to put the valve caps back on the valve stems. They help prevent leaks by keeping out dirt and moisture.
Malfunction Indicator Light (MIL) (check engine light)
This indicator light is part of the Engine Control System which monitors various
emission control system components. If this light illuminates while driving, it
indicates that a potential malfun ...
Ultrasonic Sensor: Repair procedures
Removal
1.
Lift up the vehicle.
(Refer to GI group - "Lift and support points")
2.
Remove the rear bumper.
(Refer to the BD group - "Rear bumper")
3.
Pull out the sensor by opening the s ...