1.Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.
CAUTION - Wiper arms
Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.
2.Compress the clip and slide the blade assembly downward
3.Lift it off the arm.
4.Install the blade assembly in the reverse order of removal.
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescriptionLower arm ball joint remover0K545-A9100Removal of front lower arm from front axle
...
Rear Washer Switch: Repair procedures
Inspection
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not normal condition, replace
wiper and washer switch.
Rear Wiper Switch
Rear Was ...