1.Turn the ignition switch to the ON position.
2.Select the defroster position pressing the defroster button ().
3.While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds.
The A/C display blinks 3 times with 0.5 second of interval. It indicates that the defogging logic is canceled or returned to the programmed status.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Front Driveshaft: Components and Components Location
Components
1. Front driveshaft (LH)2. inner shaft3. Front driveshaft (RH)
1. Split pin2. Castle nut3. washer4. BJ assembly5. Clip A6. BJ boot band7. BJ boot8. Dynamic damper band9. Dynamic d ...
Cylinder Block: Repair procedures
Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connec ...