Kia Sportage: Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation
in extremely humid weather. The difference between the temperature of the outside
air and the windshield could cause the outer surface of the windshield to fog up,
causing loss of visibility. In this case, set the mode selection to the
position and fan speed control
to the lower speed.
- For maximum defrosting, set the temperature control to the extreme right/hot
position and the fan speed control to the highest speed.
- If warm air to the floor is desired while defrosting or defogging, set the
mode to the floor-defrost position.
- Before driving, clear all snow and ice from the windshield, rear window,
outside rear view mirrors, and all side windows.
- Clear all snow and ice from the hood and air inlet in the cowl grill to
improve heater and defroster efficiency and to reduce the probability of fogging
up the inside of the windshield.
Press the front blower OFF button to turn off the front air climate control system.
However, you can still operate the mode and air intake buttons as long as the ignition
switch is in the ON pos ...
Other Information:
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts.The purpose of the pre-tensioner is to make sure that the seat belts fit tightly
against the occupan ...
Tailgate open warning light
This warning light illuminates when the tailgate is not closed securely with
the ignition switch in any position. ...