Kia Sportage: Valve Body: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sportage SL Service & Repair ManualKia Sportage: Valve Body: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Automatic Transaxle System / Hydraulic System / Valve Body: Description and Operation

Description
The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

Valve Body: Components and Components Location
Component Location 1. Automatic transaxle2. Valve body assembly 1. Pressure Control Valve(PCV) adjust screw2. Solenoid valve bracket3. Oil temperature sensor4. Line Pressure Control Solenoid ...

Valve Body: Repair procedures
Removal 1. Remove the under cover (A). Tightening torque : 19.6 ~ 24.5 N.m (2.0 ~ 2.5 kgf.m, 14.5 ~ 18.1 lb-ft) 2. Remove the drain plug (A) and drain the ATF totally and then reinstall ...

Other Information:

Brake/clutch fluid
Checking the brake/clutch* fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the ...

Temperature Control Actuator: Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V ...

Categories


Copyright © www.kispmanual.com 2014-2024