1.Press the release button on the buckle (D) and remove the tongue plate (B) from the buckle (D).
2.To retract the rear center seatbelt, insert the tongue plate or similar small rigid device into the web release hole (C). Pull up on the seat belt web (A) and allow the webbing to retract automatically.
3.Insert the tongue plate into the hole on the belt assembly cover.
Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's side center pillar gives the tire pressures
reco ...
Components and Components Location
Component Location
1. Power door mirror2. Power door mirror switch3. Power folding mirror switch
...