Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12V ...
Description
The mode control actuator is located at the heater unit.
It adjusts position of mode door by operating mode control
actuator based on signal of A/C control unit. Pressing mode select ...
Tire: Repair procedures
Tire wear
1.
Measure the tread depth of the tires.
Tread depth [limit] : 1.6 mm (0.063 in.)
2.
If the remaining tread (A) depth is less than the limit, replace the tire.
&nbs ...