Kia Sportage: Repair procedures - Back View Camera System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Back View Camera System / Repair procedures

Removal
1.
Remove the tailgate trim in the trunk after removing the screws and clips.
(Refer to the BD group - "Tailgate")
2.
Remove the tailgate garnish (A) after disconnecting the connector and removing the bolts.

3.
Remove the back view camera (A) after loosening the screws (2EA).

Installation
1.
Install the back view camera.
2.
Install the tailgate garnish and trim.
Description and Operation
Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the ...

Heating,Ventilation, Air Conditioning
...

Other Information:

RCV Control Solenoid Valve: Description and Operation
Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the intercooler inlet pipe and operates the RCV actuator which controls the by-pass passage of the turbocharger comp ...

USING THE USB DEVICE
To use an external USB device, make sure the device is not connected when starting up the vehicle. Connect the device after starting up. If you start the engine when the USB device is connecte ...

Categories


Copyright © www.kispmanual.com 2014-2024