Kia Sportage: Back View Camera System

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Back View Camera System

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Components and Components Location

Component Location 1. Back view camera2. ECM mirror ...

Other Information:

Non-operational conditions of Back up warning system
The Back up warning system may not operate properly when: 1.Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2.The sensor is covered with foreign ma ...

Muffler: Repair procedures
Removal and Installation 1. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) 2. Remove the catalytic converter (B) after removing the ...