Kia Sportage: Description and Operation

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Hands Free System / Description and Operation

Function

Bluetooth Audio System

Bluetooth

You can use a Bluetooth device in your car to make a hands-free phone call or to stream music onto your in-car speakers (via this Head Unit). This Head Unit supports HFP, A2DP and AVRCP connection.

Advanced Audio Distribution Profile (A2DP)

This profile defines how high quality audio(stereo or mono) can be streamed from one device to another over a Bluetooth connection. For example: music streamed from a mobile phone to a wireless headset or caraudio.

Audio/Video Remote Control Profile (AVRCP)

This profile is designed to provide a standard interface to control TVs, Hi-fi equipment,etc. to allow a single remote control (or other device) to control all of the A/V equipment to which a user has access. It may be used in concert with A2DP or VDP.

Hands-Free Profile (HFP)

This is commonly used to allow car handsfree kits to communicate with mobile phones in the car.

Notes for mobile phones

Some functions (e.g. starting of speech recognition) are not supported by all mobile phones. We cannot guarantee that all functions described will be supported by all mobile phones with Bluetooth.

New device

This function allows you to add a new phone to the Head Units Bluetooth Device List. Maximum of 5 devices can be added to the list. If the list is full, the oldest device will be replaced by the newly added Bluetooth device, based on last pairing date.

Voice Recognition Activation

•

The voice recognition engine contained in the Bluetooth System can be activated in the following conditions :

- Button Activation

The voice recognition system will be active when the

button is pressed and after the sound of a Beep.

- Active Listening

The voice recognition system will be active for a period of time when the Voice Recognition system has asked for a customer response.

•	The system can recognize single digits from zero to nine while number greater than ten will not be recognized.

•	If the command is not recognized, the system will announce "Pardon" or No input voice signal from microphone. (No response)

•	The system shall cancel voice recognition mode in following cases : When pressing the button and saying cancel following the beep. When not making a call and pressing the button. When voice recognition has failed 3 consecutive times.

•	At any time if you say "help", the system will announce what commands are available.

Menu tree

Components and Components Location

Components 1. Hands free call switch2. Mic3. Front left speaker4. Front right speaker5. Audio head unit (hands free control) ? There is no hands free jack. This system supports Bluetooth(wirel ...

Hands Free Switch: Components and Components Location

Component Location ...

Other Information:

To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine into the key opening. If a lock is covered with ice, squirt it with an approved de-icing fluid to remove the ice. If ...

Shift Cable: Repair procedures
Inspection 1. Check the damage and operation of the control cable. 2. Check the damage of the boot. 3. Check the damage and corrosion of the bushing. 4. Check the damage or weakening o ...

Kia Sportage: Description and Operation

Components and Components Location

Hands Free Switch: Components and Components Location

Other Information:

Categories