Kia Sportage: Rear Washer Switch: Repair procedures - Rear Wiper/Washer - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Rear Washer Switch: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Rear Wiper/Washer / Rear Washer Switch: Repair procedures

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and washer switch.

Rear Wiper Switch

Rear Washer Switch

Rear Wiper Motor: Repair procedures
Inspection Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively. 3. Check that ...

Rear Washer Motor: Repair procedures
Inspection 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.     Before filling the reservoir tank with water, check the fil ...

Other Information:

Rear Disc Brake: Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~107.9 N.m(9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft) 2. Remove the rear shock absorber (A). [2WD Only] (Refer to the Susp ...

Components and Components Location
Components 1. HECU module2. Front wheel speed sensor3. Rear wheel speed sensor4. Yaw rate & Lateral & Longitudinal G sensor5. Steering angle sensor6. ABS Warning lamp7. Parking brake/EBD ...

Categories


Copyright © www.kispmanual.com 2014-2024