Circuit Diagram (1) |
Circuit Diagram (2) |
CLU1 message signal flow (B > C CAN gateway) |
CLU2 message signal flow (B > C CAN gateway) |
CLU message 1 signal flow (C > B CAN gateway) |
CLU message 3 signal flow (C > B CAN gateway) |
Indicator light
When the ignition switch is turned ON, the indicator light illuminates, then
goes off if ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating and illuminates ...
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A) after removing 3 screws.
Take care not to damag ...