Kia Sportage: Power Door Mirror Switch: Repair procedures - Power Door Mirrors - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Power Door Mirror Switch: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Power Door Mirrors / Power Door Mirror Switch: Repair procedures

Removal
Driver Door Mirror Switch
1.
Disconnect the negative battery terminal.
2.
Remove the front door trim.
(Refer to the BD group - "Front door")
3.
Remove the screws from power window switch (A) and connectors (B).

4.
Remove the driver power window switch (A) from front door trim.

   
Be careful not to damage the hook when removing the switch module.
Installation
Driver Door Mirror Switch
1.
Install the driver power window switch and connectors.
2.
Install the front door trim.
Inspection
1.
Remove the front door trim and power door mirror switch module (A).

2.
Check for the continuity between terminals of power door mirror switch according to the table.

Power Door Mirror Switch: Schematic Diagrams
Circuit Diagram ...

Power Door Mirror Actuator: Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door delta cover. (Refer to the BD group - "Front door") 3. Disconnect the connector from the door mirror. ...

Other Information:

Yaw-rate and Lateral G Sensor: Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the floor console upper cover. 3. Disconnect the yaw rate & lateral & Longitudinal G se ...

Roller blind
The roller blinds are installed inside of the sunroof and glass roof. Open or close the roller blind manually using the handle (1) when you need to. Before opening or closing the sunroof, open the ...

Categories


Copyright © www.kispmanual.com 2014-2025