Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door delta cover.
(Refer to the BD group - "Front door") |
3. |
Disconnect the connector from the door mirror. |
4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn Signal Lamp
Mirror Folding |
Front Driveshaft: Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.3 ~ ...
Fan speed control
The fan speed can be set to the desired speed by operating the fan speed control
switch.
To change the fan speed, press ()
the switch for higher speed, or push ()
the switch for lower speed. ...