Kia Sportage: Heating
1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired speed.
5.If dehumidified heating is desired, turn the air conditioning system (if equipped)
on.
• If the windshield fogs up, set the mode to the
or
position.
Operation Tips
- To keep dust or unpleasant fumes from entering the vehicle through the ventilation
system, temporarily set the air intake control to the recirculated air position.
Be sure to return the control to the fresh air position when the irritation
has passed to keep fresh air in the vehicle. This will help keep the driver
alert and comfortable.
- Air for the heating/cooling system is drawn in through the grilles just
ahead of the windshield. Care should be taken that these are not blocked by
leaves, snow, ice or other obstructions.
- To prevent interior fog on the windshield, set the air intake control to
the fresh air position and fan speed to the desired position, turn on the air
conditioning system, and adjust the temperature control to desired temperature.
1.Set the mode to the position.
2.Set the air intake control to the outside (fresh) air position.
3.Set the temperature control to the desired position.
4.Set the fan speed control to the desired ...
Kia Air Conditioning Systems are filled with environmentally friendly R-134a
refrigerant.
1.Start the engine. Press the air conditioning button.
2.Set the mode to the position.
3.Set the air int ...
Other Information:
Power Door Mirror Actuator: Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door delta cover.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the door mirror.
...
Troubleshooting
Failure Diagnosis
1.
In principle, ESC and TCS controls are prohibited in case of ABS failure.
2.
When ESC or TCS fails, only the failed system control is prohibited.
3.
The solenoid valve ...