Canister Close Valve (CCV) is installed on the canister
ventilation line. It seals evaporative emission control system by
shutting the canister from the atmosphere when leakage detecting system
operates.
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the RCV control solenoid valve connector.
3.
Measure resistance between the valve terminals 1 and 2.
4.
Check that the resista ...
Battery replacement
A transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1.Insert a slim tool into the slot and gently p ...
Oil Cooler: Repair procedures
Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap to speed draining.
2.
Disconnect the oil cooler coolant hoses (A).
3.
Remove the oil filter (A).
4.
Loo ...