Troubleshooting |
Symptom | Suspect area |
Engine will not start or struggle to start | Vapor hose damaged or disconnected |
Engine struggles to start | Malfunction of the Purge Control Solenoid Valve |
Rough idle or engine stalls | Vapor hose damaged or disconnected |
Malfunction of the PCV valve | |
Rough idle | Malfunction of the Evaporative Emission Control System |
Excessive oil consumption | Positive crankcase ventilation line clogged |
Purge Control Solenoid Valve (PCSV): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Mode Control Actuator: Repair procedures
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode control actuator.
3.
Verify that the mode control actuator operates to the defrost
mode when connecting 12V to the termin ...