Kia Sportage: Crash Pad: Components and Components Location - Interior - Body (Interior and Exterior) - Kia Sportage SL Service & Repair ManualKia Sportage: Crash Pad: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Interior / Crash Pad: Components and Components Location

Components

1. Main crash pad assembly
2. Crash pad side cover [LH]
3. Crash pad side cover [RH]
4. Cluster fascia panel
5. Reinforcing panel
6. Crash pad lower panel
7. Center facia panel
8. Crash pad garnish
9. Glove box housing
10. Glove box
11. Cowl cross bar assembly

Console: Repair procedures
Replacement Floor Console Replacement [M/T]     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the r ...

Crash Pad: Repair procedures
Replacement Cluster Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, ...

Other Information:

Intercooler: Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove the air cleaner assembly. (1) Remove ...

Components and Components Location
Component Location 1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low pitch)4. Clock spring ...

Categories


Copyright © www.kispmanual.com 2014-2025