Replacement |
1. |
Remove the wiper arm cover (B). |
2. |
After loosening the mounting nuts, then remove the wiper arm (A).
|
3. |
Remove the washer nozzle hose (B). |
4. |
Detach the clips, then remove the cowl top cover (A). |
5. |
Installation is the reverse of removal.
|
General Information
General
1.
Basically, all measurements in this manual are taken with a tracking gauge.
2.
When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
3.
...
Smart key: Repair procedures
Smart Key
Smart Key Code Saving
1.
Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS.
2.
Select the vehicle model a ...