Kia Sportage: Master Cylinder: Components and Components Location - Brake System - Brake System - Kia Sportage SL Service & Repair ManualKia Sportage: Master Cylinder: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Brake System / Brake System / Master Cylinder: Components and Components Location

Components

1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder

Brake Booster: Repair procedures
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depress ...

Master Cylinder: Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the battery terminal and then remove the battery. 3. Disconnect the ECM connector and the E ...

Other Information:

Front Hub / Knuckle / Tone Wheel: Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ~ ...

Specifications
Specifications Purge Control Solenoid Valve (PCSV) ? Specification ItemSpecificationCoil Resistance (?)19.0 ~ 22.0 [20°C(68°F)] Fuel Tank Pressure Sensor (FTPS) ? Type: Piezo-Resistive ...

Categories

Copyright www.kispmanual.com 2014-2026