Kia Sportage: Pressure Sensor: Schematic Diagrams

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / 4 Wheel Drive (4WD) System / Coupling Assembly / Pressure Sensor: Schematic Diagrams

Pressure Sensor: Description and Operation

Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. I ...

Pressure Sensor: Repair procedures

Inspection     If you have trouble code related to the pressure sensor (P1825, P1826, P1827, P1828), check pressure sensor according to the inspection process. Pre ...

Other Information:

Rear window wiper blade
1.Raise the wiper arm and pull out the wiper blade assembly. 2.Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place. 3.Make sur ...

Rear Seat: Repair procedures
Replacement Seat Assembly Replacement 1. After loosening the mounting bolt, then remove the rear seat cushion (A). Tightening torque : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...