Fuel Tank Pressure Sensor (FTPS) is a component of the
evaporative emission control system. It is installed on the fuel tank
near the fuel pump assembly. It checks the evaporative system and
detects an evaporative leak in the system.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification: Refer t ...
Specification
Pressure[kPa (kgf/cm?, in H2O)Output Voltage (V)-6.67 (-0.068, -26.8)0.502.5+6.67 (0.068, 26.8)4.5
...
Other Information:
Fuel requirements
Your new vehicle is designed to use only unleaded fuel having a pump octane number
((R+M)/2) of 87 (Research Octane Number 91) or higher. (Do not use methanol blended
fuels)
Your new vehicle is d ...
Fender: Repair procedures
Replacement
•
When removing and installing the fender, an assistant is necessary.
•
Be careful not to damage the fender and body.
•
When remo ...