Kia Sportage: Rail Pressure Sensor (RPS): Troubleshooting| Signal Waveform |

Rail Pressure Sensor (RPS): Specifications
Rail Pressure Sensor (RPS): Schematic DiagramsIntake Actuator: Description and Operation
Description
1.
The intake actuator is located at the blower unit.
2.
It regulates the intake door by signal from control unit.
3.
Pressing the intake selection switch will shift between re ...
SRS Control Module (SRSCM): Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Disconnect the DAB, PAB, SAB, CA ...