Kia Sportage: Heated Oxygen Sensor (HO2S): Specifications
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S): Specifications
| Specification |
HO2S [Bank 1/Sensor 1]
| Item | Specification |
| Heater Resistance (?) | 2.5 ~ 4.0 [20°C(68°F)] |
HO2S [Bank 1/Sensor 2]
| A/F Ratio (?) | Output Voltage(V) |
| RICH | Approx. 0.9 |
| LEAN | Approx. 0.04 |
| Item | Specification |
| Heater Resistance (?) | 3.3 ~ 4.1?[21°C(69.8°F)] |
Heated Oxygen Sensor (HO2S): Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina
and is installed both upstream and downstream of the Manifold Catalytic
Converter. The sensor output voltage varies in ...
Heated Oxygen Sensor (HO2S): Schematic Diagrams
Circuit Diagram
...
Other Information:
Underdrive Brake Control Solenoid Valve(UD/B_VFS): Specifications
Specifications
Direct control VFS[UD/B]
? Control type : Normal high type
Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Internal resis ...
Starter Relay: Repair procedures
Inspection
1.
Remove the fuse box cover.
2.
Remove the starter relay (A).
3.
Using an ohmmeter, check that there is continuity between each terminal.
TerminalContinuity30 - 87NO85 - 86Y ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024