Components Location |
1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) | 5. Canister close valve (CCV) 6. Fuel level sensor (FLS) 7. Fuel tank air filter 8. Catalytic converter (CCC) |
1. PCV Valve | 2. Canister |
3. Purge Control Solenoid Valve (PCSV) | 4. Fuel Tank Pressure Sensor (FTPS) |
5. Canister Close Valve (CCV) 7. Fuel Tank Air Filter | 6. Fuel Level Sensor (FLS) |
8. Catalytic converter (CCC) | |
Repair procedures
Inspection
Front Door Lock Actuator Inspection
1.
Remove the front door trim.
(Refer to the BD group - "Front door")
2.
Remove the front door module.
3.
Disconnect the 7P connector from ...
Power Mosfet: Repair procedures
Inspection
1.
Ignition "ON"
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.
Specification
...