System Block Diagram |
Component part | Function | |
Vehicle-speed sensor | Converts vehicle speed to pulse. | |
ECM | Receives signals from sensor and control switches. | |
Cruise control indicator | Illuminate when CRUISE main switch is ON (Built into cluster) | |
Cruise Control switches | ON/OFF switch | Switch for automatic speed control power supply. |
Resume/Accel switch | Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch) | |
Set/Coast switch | ||
Cancel switches | Cancel switch | Sends cancel signals to ECM. |
Brake-pedal switch | ||
Transaxle range switch (A/T) | ||
ETS motor | Regulates the throttle valve to the set opening by ECM. |
Jack label
Type A
Type B
Type C
1. Model Name
2. Maximum allowable load
3. When using the jack, set your parking brake.
4. When using the jack, stop the engine.
5. Do not get under a vehicle that is ...
Alternator: Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal first, then the positive terminal.
Tightening torque :
(+) terminal : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)
(-) te ...