Kia Sportage: Exhaust Manifold: Components and Components Location - Intake And Exhaust System - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Exhaust Manifold: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Intake And Exhaust System / Exhaust Manifold: Components and Components Location

Components

1. Hear protector
2. EWGA(Electric Waste Gate Actuator)
3. C-ring
4. Turbo manifold module
5. Turbocharger stay
6. Trubo adapter gasket
7. Turbo adapter
8. Turbo adapter heat protector
9. Oil drain pipe assembly
10. Turbocharge oil drain gasket
11. Oil feed pipe & hose assembly
12. Oil drain gasket
13. Exhaust manifold gasket
14. Turbocharger water feed hose
15. Turbocharger water drain hose

Intake Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Remove the ai ...

Exhaust Manifold: Repair procedures
Removal and Installation 1. Remove the engine cover. 2. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 3. Disconnect t ...

Other Information:

Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Tur ...

Power outlet
Front Rear The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps ...

Categories


Copyright © www.kispmanual.com 2014-2025