Kia Sportage: Rear window wiper blade

Third generation SL (2010–2016) / Kia Sportage SL Owners Manual / Maintenance / Wiper blades / Blade replacement / Rear window wiper blade

1.Raise the wiper arm and pull out the wiper blade assembly.

2.Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place.

3.Make sure the blade assembly is installed firmly by trying to pull it slightly.

To prevent damage to the wiper arms or other components, have an authorized Kia dealer replace the wiper blade.

Front windshield wiper blade

1.Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip. CAUTION - Wiper arms Do not allow the wiper arm to fall against the windshield, since it may chip ...

Other Information:

Blower Unit: Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater blower unit. (Refer to HA group - "Heater Unit") 3. Remove the heater blower unit (A) fro ...

Rear Glass Defogger Printed Heater: Repair procedures
Inspection Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply finger pressure on the tin foil, moving the tin foil a ...

Kia Sportage: Rear window wiper blade

Front windshield wiper blade

Battery

Other Information:

Categories