1.Set the fan speed to the desired position.
2.Select desired temperature.
3.Select the or position.
4.The outside (fresh) air will be selected automatically. If the position is selected, air conditioning will also be selected automatically.
If the air conditioning and/or outside (fresh) air position are not selected automatically, press the corresponding button manually.
Power Window Motor: Repair procedures
Inspection
Front Power Window Motor
1.
Remove (-) negative battery terminal.
2.
Remove the front door trim.
(Refer to the BD group - "Front door")
3.
Disconnect the connector from the m ...
Receiver-Drier: Repair procedures
Replacement
1.
Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser.
Tightening torque :
20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft)
2.
Remove the ...