Pull the rear portion of the control switch up to raise or press down to lower the seat cushion. Release the switch once the seat reaches the desired position.
Seat Belt Pretensioner (BPT): Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work.
2.
To remove the seat belt anchor pretensioner (C), keep on
pushing the lock pi ...
Transaxle Control Module (TCM): Repair procedures
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check point. ...