Kia Sportage: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Auto Lighting Control System / Description and Operation
| Description |
This function describes the following features
| – |
Input detection by Auto Light Sensor. |
| – |
Generate Auto Light Out Status data. |
| – |
Send Auto Light Out Status. |
| – |
Tail Lamp Control by Auto light Mode. |
| – |
Head Lamp Low Control by Auto light Mode. |
| – |
AV Tail Control by Auto Light sensor level. |
| • |
Auto Light Mode State Diagram is based on Auto Light Sensor''s level. |
| • |
Power condition of Auto Light Action |
| – |
When ACC, IGN, START terminal states, Auto Light Sensor operates. |
Schematic Diagrams
Circuit Diagram
...
Auto Light Sensor: Repair procedures
Inspection
In the state of IGN1 ON, when multi function switch module
detects auto light switch on, tail lamp relay output and head lamp low
relay output are controlled according to auto light ...
Other Information:
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perf ...
Front Washer Motor: Repair procedures
Inspection
Front Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with washer fluid.
Before filling the reservoir tank ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024