Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly.
(Refer to the BD group - "Roof trim") |
3. |
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch. |
Troubleshooting
Troubleshooting
Problem Symptoms Table
Use the table below to help you find the cause of the
problem. The numbers indicate the priority of the like cause of the
problem. Check each part in o ...
Placing a passenger seat belt into the auto lock mode
The auto lock mode will help prevent the normal movement of the child in the
vehicle from causing the seat belt to loosen and compromise the child restraint
system. To secure a child restraint s ...