Kia Sportage: Climate Seat: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Seat Electrical / Climate Seat: Repair procedures
| Removal |
| 1. |
Remove the front seat assembly.
(Refer to BD group - "Front Seat") |
| 2. |
Remove the seat back cover and cushion cover.
(Refer to BD group - "Front Seat") |
| 3. |
Remove the ventilation duct (A) from the seat back after loosening the screw and rivet.
|
| 4. |
Remove the ventilation duct and blower (A) in the cushion and back after loosening the screw.
|
| 5. |
Remove the bracket and ventilation seat ECU (B) after loosening screws (A, 3EA).
|
| Installation |
| 1. |
Install the connectors and air ventilation control unit. |
| 2. |
Install the air ventilation duct and blower. |
| 3. |
Install the seat back cover. |
| 4. |
Install the seat assembly and seat track cover. |
Climate Seat: Description and Operation
Description
The system uses a FAN under the seat to help remove the moisture and warmth from occupants and surface of the seats.
It pulls in cabin air through the blower installed under the
seat ...
Fuses And Relays
...
Other Information:
Tailgate open warning light
This warning light illuminates when the tailgate is not closed securely with
the ignition switch in any position. ...
Photo Sensor: Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2025