Kia Sportage: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Horn / Components and Components Location

Horn

...

Repair procedures

Removal 1. Remove the radiator upper cover. (Refer to the BD group - "Front bumper") 2. Remove the bolt and disconnect the horn connector, then remove the low pitch horn (A). Installation ...

Other Information:

CVVT Oil Temperature Sensor (OTS): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OTS connector. 3. Remove the OTS. 4. After immersing the thermistor of the sensor into engine coolant, measure resistance ...

Rear Wiper Motor: Repair procedures
Inspection Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively. 3. Check that ...